ErgoStrap 713X / 726X / 745X – X-Pert Line

Learn More

ErgoStrap 713X / 726X / 745X – X-pert Line

The Benchmark in Ergonomic Pallet Strapping! X-treme ergonomicX-treme comfortableX-treme process reliable

Standard equipment

⦿ Elegant operation via touchscreen and joystick with intuitive user guidance
⦿ Fully integrated sealing head with touchscreen and ergonomically shaped controls
⦿ Tool-Lift counterbalances the operation of sealing head
⦿ Easy going and comfortable handling with ergonomically shaped handles
⦿ Fully covered for increased working safety in classy design

Special equipment

⦿ Headpiece with bumper: For strapping pallets with lateral overlappings up to 40mm, e.g. cardboard covers or uneven side surfaces.
⦿ Line Laser: The Line Laser indicates the distance and the alignment of the machine to the pallet, which simplifies the positioning of the machine in front of the pallet.
⦿ Reversing sledge:
      ⦿ Reversing sledge 85S (only available for E-conomy Line): Slimmer version of the standard sledge. Minimum clearance width: 160 mm, instead of 185 mm in standard equipment.
      ⦿ Reversing sledge 47: (available for X-pert Line and E-conomy Line) Narrower version of the standard sledge. Minimum clearance height: 47 mm, instead of 87 mm in standard equipment.
      ⦿ Reversing sledge 47S: (available for X-pert Line and E-conomy Line) Slimmer version of the reversing sledge 47. Minimum clearance width: 160 mm, instead of 185 mm in standard equipment.
⦿ Triplex-Tool-Lift: The Triplex–Tool–Lift enables tensioning and sealing not only on the side of a pallet (side sealing), but also on the top (top sealing) without removing the sealing head from the Triplex–Tool–Lift. Minimum pallet height for side sealing is 760 mm. Maximum pallet height for top sealing is 780 mm. Minimum pallet height for top sealing is 100 mm.
⦿ Sealing head removable from the Triplex–Tool–Lift: If the strap needs to be tensioned and sealed in positions which cannot be reached by the Triplex–Tool–Lift, e.g. inside a mesh transport box or for horizontal strapping. By pulling a bolt, the sealing head can be removed and the strap can be tensioned and welded in any position.
⦿ Strap brake relief: The brake resistance of the strap coil can be reduced to 20% by simply pushing a foot pedal. Manually pulling out strap is a lot easier, especially for pallets of 1.2 m and higher.

Comparison Chart

ErgoStrap

700X

713X

726X

745X

Power Electric motor with reinforced angle gear, electronically controlled. Electric motor with reinforced angle gear, electronically controlled.
Drive 3 x 12V AGM Battery 3 x 12V AGM Battery
Battery Pack 36V 36V
Strapping
Cycles per
Battery
Charge
(Standard
Strapping)
650 650
Charger 36V Charger, 4,5A 36V Charger, 4,5A
Chain Speed 66m/min 66m/min
Pallets Width
Setting
via Siemens Industrial Touchscreen in 10cm steps, works with work gloves via Siemens Industrial Touchscreen in 10cm steps, works with work gloves
Other Settings Individual setting options via the Siemens Industrial Touchscreen such as:
chain speed
chain length
standby timer
strap lifter time for upper position
Line Laser on/off
Sealing head on/off
Individual setting options via the Siemens Industrial Touchscreen such as:
chain speed
chain length
standby timer
strap lifter time for upper position
Line Laser on/off
Sealing head on/off
Indicators charging level indicated graphically and in %
set pallet width
permanent graphically indication of the ChainLance position
strapping cycles
sliding window open graphically and in writing
safety instructions
menu-driven step by step description for semi automated strap roll change
charging level indicated graphically and in %
set pallet width
permanent graphically indication of the ChainLance position
strapping cycles
sliding window open graphically and in writing
safety instructions
menu-driven step by step description for semi automated strap roll change
Software Update Easy update via USB stick Easy update via USB stick
AGR-Certification
ChainLance Special, glass fiber reinforced, high strength soft-slide chain Special, glass fiber reinforced, high strength soft-slide chain
Tool-Lift
Sealing Head
Tension 150N – 1200N 400N – 2500N 400N – 4500N
Strap Types PP/PET PP/PET
Strap Width 9-25mm 9-13mm 12-16mm 15-19mm
Strap Thickness 0,5-1,3mm 0,35-0,85mm 0,5-1,0mm 0,8-1,3mm